Encountering errors when building guide

mhowardmhoward Posts: 4
edited July 2016 in Kraken Rigging Framework

Hitting these errors and warnings when loading / building the bob_rig.krg file in Maya 2016.

// kraken : Building Guide // 
# [Splice] Constructed FabricSplice Client. # 
// Error: [Splice] Unhandled DataType 'NeckGuideSolver' // 
// Error: [Splice] Unhandled DataType 'TwoBoneIKGuideSolver' // 
// Error: [Splice] Unhandled DataType 'TwoBoneIKGuideSolver' // 
# Warning: Operator 'thumbLLFingerGuideOp' of type 'Kraken.Solvers.Biped.BipedFingerGuideSolver' port 'exec' not connected. # 
# Warning: Operator 'indexLLFingerGuideOp' of type 'Kraken.Solvers.Biped.BipedFingerGuideSolver' port 'exec' not connected. # 
# Warning: Operator 'middleLLFingerGuideOp' of type 'Kraken.Solvers.Biped.BipedFingerGuideSolver' port 'exec' not connected. # 
# Warning: Operator 'ringLLFingerGuideOp' of type 'Kraken.Solvers.Biped.BipedFingerGuideSolver' port 'exec' not connected. # 
# Warning: Operator 'pinkyLLFingerGuideOp' of type 'Kraken.Solvers.Biped.BipedFingerGuideSolver' port 'exec' not connected. # 
# Warning: Operator 'thumbLRFingerGuideOp' of type 'Kraken.Solvers.Biped.BipedFingerGuideSolver' port 'exec' not connected. # 
# Warning: Operator 'indexLRFingerGuideOp' of type 'Kraken.Solvers.Biped.BipedFingerGuideSolver' port 'exec' not connected. # 
# Warning: Operator 'middleLRFingerGuideOp' of type 'Kraken.Solvers.Biped.BipedFingerGuideSolver' port 'exec' not connected. # 
# Warning: Operator 'ringLRFingerGuideOp' of type 'Kraken.Solvers.Biped.BipedFingerGuideSolver' port 'exec' not connected. # 
# Warning: Operator 'pinkyLRFingerGuideOp' of type 'Kraken.Solvers.Biped.BipedFingerGuideSolver' port 'exec' not connected. # 
// Error: [Splice] Unhandled DataType 'TwoBoneIKGuideSolver' // 
// Error: [Splice] Unhandled DataType 'TwoBoneIKGuideSolver' //

Comments

  • EricTEricT Administrator, Moderator, Fabric Employee Posts: 305 admin

    Hi @mhoward,

    The error messages about the Unhandled DataType should be innocuous. The same is true for the exec port warnings. Are you using a daily build or are you using the official 1.2 release? I've re-coded much of the Fabric Operator code in recent weeks and it should handle the exec ports better and not report them.

    Is the rig not working after building?

    Eric T.

    Eric Thivierge
    Kraken Developer
    Kraken Rigging Framework

  • mhowardmhoward Posts: 4

    This is on the 1.2.0 (Latest Stable) release. The rig appeared to be working properly as far as I could tell. Just wanted to make sure I wasn't missing anything.

Sign In or Register to comment.